The EZI way to lift what you want when you want !
Ezi-Lift EL Lift assists in getting the job done just as efficiently and effectively as a larger unit but with the agility and ease of use of a compact unit.. 6ft,8ft,10ft models available.
Sumner Series assists in getting the job done as efficiently and effectively as ever by world leaders in material handling manufacturers.
Ezi-Lift Counterbalance EL Lift assists in getting the job done just as efficiently and effectively as a larger unit but with the agility and ease of use of a compact unit.. 6ft,8ft,10ft models available. With the ability to have no forward facing legs you can manoeuvre close up to the task at hand.
Sumner Counterbalanced Series - No front legs to interfere with lifting
Cart & mast section breakdown for ease of transportation
300 - 455 kg lifting capacity
Four heights 3 - 7 m
2 speed winch
Material Lifts to suite your every need from lifting panels to complete systems from 1 Kg to 450Kg Safely.
The GUIL TORO series Material Lifter, with a special design that allows the legs to be inserted both in the front and the back of the tower, to be able to use it flush to the wall or workspace. (Note: Counterweight holder and weights available seperately)
Electric Portable Lifter is a compact, lightweight and portable lifter that can be carried by a single person. With a multitude of applications such as the installation of air conditioning units, awnings, beams and HVAC duct to name a few, the applications for its use are endless.
Genie® Super Hoist™ continues the legacy of innovation with an incredibly compact, easy-to-use design.
The Genie brand was born in 1966 with the original Genie® Hoist – a unique portable pneumatic lift that was so successful, it launched the development of a full range of material hoists and aerial work platforms.
Ezi-Lift AL330 is the ultimate unit for lifting duct, ac units, garage doors, awnings, beams or just about anything into place safely and easily.
With a large lift platform measuring
770mm x 460mm, a working height of 3.3m and a SWL of 110Kg there isn't much this compact unit cant do.
900 kg payload with 3 drive concepts.
The Wienold GML800 offers three mast drive concepts and supplies energy for electrical attachments.
AC: 240V DC: 24V M: Cordless Drill Worm-winch
The CA400 is the "power lifter" in the Portable Lifter range.
It has a different base configuration compared to the CM340 & CM520 .
It is also mounted on wheels for easy manoeuvrability.
Also featuring a higher lift capacity when compared to the other Portable Lifters in our range - up to 150kg, lifting to heights of 4m
Sumner Series Aluminium Gantry comes in a 3,4 & 5 metre beam lengths with a 2 tonne capacity. Lightweight and portable, this gantry is easily assembled by 2 people, with convenient carrying straps on the beam. Better yet it's now certified to the Australian Standards AS1418.1 and AS1418.3.
The MFC 750 / K is the classic counterweight with two long, backwards-mounted booms with counterweights. In this version it offers 900 kg payload, which is brought to a hook height of 2.90 m height. Equipped with a cable winch, an MFC is ideal for lowering loads well below zero - especially where heavy equipment can not be used.
With the short version MFC 750 / Ks you can operate wherever high payload is required, but confined space conditions prevent the use of the MFC 750 / K or other machines. The Ks comes out with only 0.65 x 1.20 m and provides 745 kg of payload.
The Aardwolf Manual Counterbalanced Crane has an adjustable boom to allow for maximum adjustment and versatility to lift a variety of loads. The boom is raised via a hydraulic hand pump. The counterbalance design eliminates the need for front legs. This makes the unit easier to manoeuver and allows the crane to reach tight, hard to reach areas.
Fitted with hard-wearing, high-capacity nylon front wheels, this device can pick and carry loads and be pushed on a flat surface to transport materials on solid paved surfaces.
The TORO Series lifter that thanks to its components has a sturdy but light design, is certified to lift loads of up to 350 kg to a maximum height of 8 metres.
Our lifters have a special design that allows the legs to be inserted both in the front and the back of the tower, to be able to use it flush to the wall or workspace. These legs are equipped with height adjustable wheels. (Note: Counterweight holder and weights available)
The lifter is equipped with an automatic brake winch (ref.: BULL500/2) which stops and holds the load at the desired height; when the handles are released the automatic brake holds the load in place.
Note: GUIL has designed a practical and safe way to raise the TORO Series with an electric system (ref. ELECTRIC). This electric system (sold separately) converts the lifter into an electric tower.